NETGEAR NETGEAR user manual Set garp timer leaveall all, Show garp, No set garp timer leaveall all

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Note: This command has an effect only when GVRP is enabled.

Format	no set garp timer leaveall
Mode	Interface Config

set garp timer leaveall all

This command sets how frequently Leave All PDUs are generated for all ports. A Leave All PDU indicates that all registrations will be unregistered. Participants would need to rejoin in order to maintain registration. The value applies per port and per GARP participation. The time may range from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds.

Note: This command has an effect only when GVRP is enabled.

Default	1000
Format	set garp timer leaveall all <200-6000>
Mode	Global Config

no set garp timer leaveall all

This command sets how frequently Leave All PDUs are generated for all ports to 1000 centiseconds (10 seconds). .

Note: This command has an effect only when GVRP is enabled.

Format	no set	garp timer leaveall all
Mode	Global	Config

show garp

This command displays Generic Attributes Registration Protocol (GARP) information.

Format	show garp
Mode	Privileged EXEC and User EXEC
GMRP Admin Mode	This displays the administrative mode of GARP Multicast Registration Protocol
	(GMRP) for the system.
GVRP Admin Mode	This displays the administrative mode of GARP VLAN Registration Protocol
	(GVRP) for the system

Switching Commands 8-99

202-10088-01, March 2005