NETGEAR NETGEAR System Info and System Setup, Quick Start up Software Version Information

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

System Info and System Setup

Quick Start up Software Version Information

Table 6-1.	Quick Start up Software Version Information
Command		Details
show hardware		Allows the user to see the software version the device contains
(in Privileged EXEC)
		Machine Model (The type and number of ports the device provides.)
		For example:
		Machine Model FSM7328S
		24 = 24 10/100 ports
		04 = 4 Uplink ports on front of switch
Quick Start up Physical Port Data

Table 6-2.	Quick Start up Physical Port Data
Command		Details
show port all		Displays the Ports
(in Privileged EXEC)
		slot/port
		Type - Indicates if the port is a special type of port
		Admin Mode - Selects the Port Control Administration State
		Physical Mode - Selects the desired port speed and duplex mode
		Physical Status - Indicates the port speed and duplex mode
		Link Status - Indicates whether the link is up or down
		Link Trap - Determines whether or not to send a trap when link status
		changes
		LACP Mode - Displays whether LACP is enabled or disabled on this
		port.

6-2 Quick Start up

202-10088-01, March 2005