NETGEAR NETGEAR user manual Show arp, Age Time seconds, Retries, Cache Size

202-10088-01, March 2005

Is the hardware MAC address of that device.

Is the routing slot/port associated with the device ARP entry.

Is the type that was configured into the unit. The possible values are Local, Gateway, Dynamic and Static.

This field displays the current age of the ARP entry since last refresh (in hh:mm:ss format

Is the IP address of a device on a subnet attached to an existing routing interface.

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Format	clear arp-cache	[gateway]
Mode	Privileged Exec

show arp

This command displays the Address Resolution Protocol (ARP) cache. The displayed results are not the total ARP entries. To view the total ARP entries, the operator should view the show arp results in conjunction with the show arp switch results.

Format	show arp
Mode	Privileged EXEC
Age Time (seconds)	Is the time it takes for an ARP entry to age out. This value was
	configured into the unit. Age time is measured in seconds.

Response Time (seconds) Is the time it takes for an ARP request timeout. This value was configured into the unit. Response time is measured in sec- onds.

Retries	Is the maximum number of times an ARP request is retried. This
	value was configured into the unit.
Cache Size	Is the maximum number of entries in the ARP table. This value
	was configured into the unit.

Dynamic Renew Mode Displays whether the ARP component automatically attempts to renew dynamic ARP entries when they age out.

Total Entry Count Current / Peak Field listing the total entries in the ARP table and the

peak entry count in the ARP table.

Static Entry Count Current / Max Field listing the static entry count in the ARP table and maximum static entry count in the ARP table.

The following are displayed for each ARP entry.

IP Address

MAC Address

Interface

Type

Age

Routing Commands 10-5