NETGEAR NETGEAR user manual Show interface ethernet

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Transmit Packets Errors The number of outbound packets that could not be transmitted because of errors.

Collisions Frames The best estimate of the total number of collisions on this Ether- net segment.

Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and sec- onds since the statistics for this port were last cleared.

The display parameters, when the argument is 'switchport', is as follows :

Packets Received Without Error The total number of packets (including broadcast pack- ets and multicast packets) received by the processor.

Broadcast Packets Received The total number of packets received that were directed to the broadcast address. Note that this does not include multicast packets.

Packets Received With Error The number of inbound packets that contained errors pre- venting them from being deliverable to a higher-layer protocol.

Packets Transmitted Without Error The total number of packets transmitted out of the interface.

Broadcast Packets Transmitted The total number of packets that higher-level protocols requested to be transmitted to the Broadcast address, including those that were discarded or not sent.

Transmit Packet Errors The number of outbound packets that could not be transmitted because of errors.

Address Entries Currently In Use The total number of Forwarding Database Address Table entries now active on the switch, including learned and static entries.

VLAN Entries Currently In Use The number of VLAN entries presently occupying the VLAN table.

Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and sec- onds since the statistics for this switch were last cleared.

show interface ethernet

This command displays detailed statistics for a specific port or for all CPU traffic based upon the argument.

8-4 Switching Commands

202-10088-01, March 2005