NETGEAR NETGEAR Set igmp interfacemode all, Set igmp maxresponse, No set igmp interfacemode all

	User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Format	no set igmp groupmembership-interval
Mode	Global Config

set igmp interfacemode all

This command enables IGMP Snooping on all interfaces. If an interface which has IGMP Snooping enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), IGMP Snooping functionality will be disabled on that interface. IGMP Snooping functionality will subsequently be re-enabled if routing is disabled or port-channel (LAG) membership is removed from an interface that has IGMP Snooping enabled.

Default	disabled
Format	set igmp interfacemode all
Mode	Global Config

no set igmp interfacemode all

This command disables IGMP Snooping on all interfaces.

Format	no set	igmp interfacemode all
Mode	Global	Config

set igmp maxresponse

This command sets the IGMP Maximum Response time on the system. The Maximum Response time is the amount of time in seconds that a switch will wait after sending a query on an interface because it did not receive a report for a particular group in that interface. This value must be less than the IGMP Query Interval time value. The range is 1 to 3599 seconds.

Default	10
Format	set igmp maxresponse <1-3599>
Mode	Global Config
no set igmp maxresponse

This command sets the IGMP Maximum Response time on the system to 10 seconds.

Format	no set igmp maxresponse
Mode	Global Config
Switching Commands	8-107

202-10088-01, March 2005