NETGEAR NETGEAR Management Vlan Command, System Configuration Commands, Network mgmtvlan, Addport

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Management VLAN Command

This command is used to set the Management VLAN.

network mgmt_vlan

This command configures the Management VLAN ID.

Default	1
Format	network mgmt_vlan <1-4094>
Mode	Privileged EXEC

System Configuration Commands

This chapter provides a detailed explanation of the System configuration commands. The commands are divided into two functional groups:

•Show commands display switch settings, statistics, and other information.

•Configuration commands configure features and options of the switch. For every configuration command, there is a show command that displays the configuration setting.

addport

This command adds one port to the port-channel (LAG). The first interface is a logical slot and port number of a configured port-channel.

Note: Before adding a port to a port-channel, set the physical mode of the port. See ‘speed’ command.

Format	addport <logical	slot/port>
Mode	Interface Config

auto-negotiate

This command enables automatic negotiation on a port. The default value is enable.

Formatauto-negotiate

8-36 Switching Commands

202-10088-01, March 2005