Superuser Commands Configuration Access | Datacom Systems VS-1200

22

VS-1200 Data Acccess Switch

4.1.4Superuser Commands (Configuration Access)

The topic headings in the following section show the long form of the Superuser command set with the shortcut input for the command noted in parenthesis. After the topic heading, a brief overview of the command display function is given followed by an example (Example: #) command input. All commands are entered after the prompt (default #) at the cursor. No auto-fill mode is available.

4.1.4.1SU (SU)

This command accesses the Superuser mode where the product can be configured. A password prompt is displayed and the default password is “password.” Then the Superuser prompt is displayed. It looks exactly like the basic prompt, except the prompt end has turned from “>” to “#,” as shown below:

> SU (SU)

Enter Password: ********

#

4.1.4.2SU SET PASSWORD (SU SE PA)

This command is used to change the Superuser access password as shown:

SU SET PASSWORD (SU SE PA)

Example: # SU SE PA

***Warning***

Modification of the SU password has serious consequences if the password is lost!!

***Warning***

#Enter Password: ********

#Confirm Password: ********

4.1.4.3SHOW USERS (SH US)

SHOW USERS (SH US): This command displays all users for the configurable product.

SHOW USERS (SH US)

Example: # SH US Administrator edituser

4.1.4.4SET PROMPT (SE PR)

This command, followed by a text string, changes the Base Prompt to the text value entered (up to

32 characters) as shown:

# SET PROMPT (SE PR) prompt text

Example: # SE PR Datacom

Datacom#

© 2009 Datacom Systems Inc

Image 22

Datacom Systems VS-1200 manual Superuser Commands Configuration Access, SU SET Password SU SE PA, Show Users SH US

Contents

USERguide Page Product Description VS-1200 Data Acccess Switch Datacom Systems Inc Table of Contents Customer Service Hardware InstallationVS-1200 Series Functional Drawing Application Proprietary Notice Terms of UseCopyright License Agreement Trademark Attribution Certifications and Marks Safety Notices and Warnings Overview VS-1200 Series Summary VS-1200 Series Features and Benefits What Shipped? Power Consumption 12W BTU/h VS-1200 Series Common SpecificationsVS-1200 Series Model Specific Specifications Operating Range Relative Humidity 5 to 90% non-condensingPage VS-1200 Series Front Panels HardwareVS-1210BT/SFP Front Panel Description PowerAny-to-Any Ports Rear Panel Description Management Port Serial DB9 Power Switch SFP seriesInput Power Rear Label BT series Command Line Interface CLI Initial ConfigurationBasic Functionality Password Recovery Basic Commands Read Only Access SET Port Monitor SE PO MO Show Groups SH GR Group Name TAP Show Port Routing SH PO RO SU SET Password SU SE PA Superuser Commands Configuration AccessShow Users SH US # SET IP Subnet Gateway SET Date Mmddyy SET Time Hhmmss # SE PO MO 3 OFF ADD User AD US Delete User Username Serial Port Configuration DB9HyperTerminal TCP/IP Winsock Management Port Configuration RJ45Port Number IP Address Configuration with HyperTerminal IP Address ConfigurationTelnet Accessories Communications HyperTerminal VS-1200 Data Acccess Switch Initial Configuration IP Address Configuration with Telnet Network Connections Accessories Command Prompt Initial Configuration Exercise CLI Setting Ports Initial Configuration # SET Port Monitor 1 from 7,9 # SET Port Monitor 2 from 8,9 # SET Port Monitor 7 from # SET Port Monitor 5 from# SET Port Monitor 6 from 3,4 # SET Port Monitor 8 from Small Form-Factor Plug Module Safety GuidelinesIntallation Prerequisites Installing the SFP Module Removing the SFP ModulePage Power Hardware InstallationAny-to-Any Connection Management Connection VS-1200 Series Functional Drawing VS-1210BT-BT/SFP VS-1204BT VS-1204SFP Gathering the Data HyperTerminal configuration example Application VS-1200 Data Acccess Switch # SET Port Monitor 6 from # SET Port Monitor 4 from# SET Port Monitor 9 from VS-1200 Data Acccess Switch Application # SET Port Monitor 7 from 2,4 # SET Port Monitor 5 from 1,3# SET Port Monitor 6 from 1,3 # SET Port Monitor 8 from 2,4 Internet Warranty Customer ServiceLimits of Liability Datacom Systems Inc