VS-1200 Data Acccess Switch | Datacom Systems manual

50

VS-1200 Data Acccess Switch

7.2All Pluggable in Optical Network (TELNET configuration example)

PREMISE: This network application consists of several workgroup optical switches that allow end users to access a group of servers.; The servers are all connected to a single server optical switch and the users are distributed across several workgroup switches. The security department wants to view all server bound access from the users and view server to server traffic.

GOAL: This application will use a VS-1210SFP as follows:

1.Fiber TAP access to optical networks

2.Aggregate traffic to provide access for analysis, security and recording devices.

The first goal requires an external fiber taps between the optical network devices. The tap makes a copy of all the data going to the financial server, and can not be shutdown like a SPAN port. The tap will allow enhanced visibility for security purposes.

The second goal involves aggregating and replicating traffic from the previous goal for specific security and network analysis to be done.

© 2009 Datacom Systems Inc

Image 50

Datacom Systems manual VS-1200 Data Acccess Switch

Contents

USERguide Page Product Description VS-1200 Data Acccess Switch Datacom Systems Inc Table of Contents VS-1200 Series Functional Drawing Application Hardware InstallationCustomer Service Proprietary Notice Terms of UseCopyright License Agreement Trademark Attribution Certifications and Marks Safety Notices and Warnings Overview VS-1200 Series Summary VS-1200 Series Features and Benefits What Shipped? Power Consumption 12W BTU/h VS-1200 Series Common SpecificationsVS-1200 Series Model Specific Specifications Operating Range Relative Humidity 5 to 90% non-condensingPage VS-1210BT/SFP HardwareVS-1200 Series Front Panels Any-to-Any Ports PowerFront Panel Description Rear Panel Description Management Port Serial DB9 Power Switch SFP seriesInput Power Rear Label BT series Basic Functionality Initial ConfigurationCommand Line Interface CLI Password Recovery Basic Commands Read Only Access SET Port Monitor SE PO MO Show Groups SH GR Group Name TAP Show Port Routing SH PO RO Show Users SH US Superuser Commands Configuration AccessSU SET Password SU SE PA # SET IP Subnet Gateway SET Date Mmddyy SET Time Hhmmss # SE PO MO 3 OFF ADD User AD US HyperTerminal Serial Port Configuration DB9Delete User Username Port Number Management Port Configuration RJ45TCP/IP Winsock Telnet IP Address ConfigurationIP Address Configuration with HyperTerminal Accessories Communications HyperTerminal VS-1200 Data Acccess Switch Initial Configuration IP Address Configuration with Telnet Network Connections Accessories Command Prompt Initial Configuration Exercise CLI Setting Ports Initial Configuration # SET Port Monitor 1 from 7,9 # SET Port Monitor 2 from 8,9 # SET Port Monitor 7 from # SET Port Monitor 5 from# SET Port Monitor 6 from 3,4 # SET Port Monitor 8 from Intallation Prerequisites Safety GuidelinesSmall Form-Factor Plug Module Installing the SFP Module Removing the SFP ModulePage Any-to-Any Connection Hardware InstallationPower Management Connection VS-1200 Series Functional Drawing VS-1210BT-BT/SFP VS-1204BT VS-1204SFP Gathering the Data HyperTerminal configuration example Application VS-1200 Data Acccess Switch # SET Port Monitor 9 from # SET Port Monitor 4 from# SET Port Monitor 6 from VS-1200 Data Acccess Switch Application # SET Port Monitor 7 from 2,4 # SET Port Monitor 5 from 1,3# SET Port Monitor 6 from 1,3 # SET Port Monitor 8 from 2,4 Limits of Liability Customer ServiceInternet Warranty Datacom Systems Inc