NETGEAR NETGEAR user manual Show ip interface brief, Show ip route

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Link Speed Data Rate	Is an integer representing the physical link data rate of the speci-
	fied interface. This is measured in Megabits per second (Mbps).
MAC Address	Is the burned in physical address of the specified interface. The
	format is 6 two-digit hexadecimal numbers that are separated by
	colons.
Encapsulation Type	Is the encapsulation type for the specified interface. The types
	are: Ethernet or SNAP.

show ip interface brief

This command displays summary information about IP configuration settings for all ports in the router. This command takes no options.

Format	show ip interface brief
Mode	Privileged EXEC and User EXEC
Slot/Port	Valid slot and port number separated by forward slashes.
IP Address	The IP address of the routing interface in 32-bit dotted decimal
	format.
IP Mask	The IP mask of the routing interface in 32-bit dotted decimal for-
	mat.
Netdir Bcast	Indicates if IP forwards net-directed broadcasts on this interface.
	Possible values are Enable or Disable.
MultiCast Fwd	Indicates the multicast forwarding administrative mode on the
	interface. Possible values are Enable or Disable.
In Access Mode	Indicates the inbound access list checking administrative mode
	on this interface. Possible values are Enable or Disable.
Out Access Mode	Indicates the outbound access list checking administrative mode
	on this interface. Possible values are Enable or Disable.

show ip route

This command displays the entire route table. This commands takes no options.

Format	show ip route
Mode	Privileged EXEC
Network Address	Is an IP address identifying the network on the specified inter-
	face.
10-12	Routing Commands

202-10088-01, March 2005