Show class-map, Class Name, Class Type, Values

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

show class-map

This command displays all configuration information for the specified class. The <classname> is the name of an existing DiffServ class.

Format	show class-map <classname>
Mode	Privileged EXEC and User EXEC

If the Class Name is specified the following fields are displayed:

Class Name	The name of this class.
Class Type	The class type (all, any, or acl) indicating how the match criteria
	are evaluated for this class. A class type of all means every match
	criterion defined for the class is evaluated simultaneously they
	must all be true to indicate a class match. For a type of any each
	match criterion is evaluated sequentially and only one need be
	true to indicate a class match. Class type acl rules are evaluated in
	a hybrid manner, with those derived from each ACL Rule
	grouped and evaluated simultaneously, while each such grouping
	is evaluated sequentially.
Match Criteria	The Match Criteria fields will only be displayed if they have been
	configured. They will be displayed in the order entered by the
	user. These are evaluated in accordance with the class type. The
	possible Match Criteria fields are: Class of Service, Destination
	IP Address, Destination Layer 4 Port, Destination MAC Address,
	Every, IP DSCP, IP Precedence, IP TOS, Protocol Keyword, Ref-
	erence Class, Source IP Address, Source Layer 4 Port, Source
	MAC Address, COS, Secondary COS, and VLAN, Secondary
	VLAN, and Ethertype.
Values	This field displays the values of the Match Criteria.
Excluded	This field indicates whether or not this Match Criteria is
	excluded.

If the Class Name is not specified, this command displays a list of all defined DiffServ classes. The following fields are displayed:

Class Name	The name of this class. (Note that the order in which classes are
	displayed is not necessarily the same order in which they were
	created.)

Quality of Service (QoS) Commands		11-31