NETGEAR NETGEAR user manual Snmp-server community, No snmp-server community

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Multiple Users Flag May be enabled or disabled. The factory default is enabled. Indi- cates whether a trap will be sent when the same user ID is logged into the switch more than once at the same time (either via telnet or serial port).

Spanning Tree Flag May be enabled or disabled. The factory default is enabled. Indi- cates whether spanning tree traps will be sent.

Broadcast Storm Flag May be enabled or disabled. The factory default is enabled. Indi- cates whether broadcast storm traps will be sent.

snmp-server community

This command adds (and names) a new SNMP community. A community name is a name associated with the switch and with a set of SNMP managers that manage it with a specified privileged level. The length of name can be up to 16 case-sensitive characters.

Note: Community names in the SNMP community table must be unique. When making multiple entries using the same community name, the first entry is kept and processed and all duplicate entries are ignored.

Default	Two default community names: Public and Private. You can
	replace these default community names with unique identifiers
	for each community. The default values for the remaining four
	community names are blank.
Format	snmp-server community <name>
Mode	Global Config

no snmp-server community

This command removes this community name from the table. The name is the community name to be deleted.

Format	no snmp-server community <name>
Mode	Global Config

Switching Commands 8-29

202-10088-01, March 2005