NETGEAR NETGEAR user manual Dot1x initialize, Dot1x login, Dot1x max-req, No dot1x max-req

	User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Format	dot1x defaultlogin <listname>
Mode	Global Config

dot1x initialize

This command begins the initialization sequence on the specified port. This command is only valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be returned.

Format	dot1x initialize <slot/port>
Mode	Privileged EXEC

dot1x login

This command assigns the specified authentication login list to the specified user for 802.1x port security. The <user> parameter must be a configured user and the <listname> parameter must be a configured authentication login list.

Format	dot1x login <user> <listname>
Mode	Global Config

dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. The <count> value must be in the range 1 - 10.

Default	2
Format	dot1x max-req <count>
Mode	Interface Config
no dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant.

Format	no dot1x max-req
Mode	Interface Config
Security Commands	9-7

202-10088-01, March 2005