User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

arp dynamicrenew

This command enables ARP component to automatically renew ARP entries of type dynamic when they age out.

Format

arp dynamicrenew

Mode

Privileged Exec

no arp dynamicrenew

 

This command disables ARP component from automatically renewing ARP entries of type dynamic when they age out.

Format

no arp dynamicrenew

Mode

Privileged Exec

arp purge

This command causes the specified IP address to be removed from the ARP cache. Only entries of type dynamic or gateway are affected by this command.

Format

arp purge <ipaddr>

Mode

Privileged EXEC

arp resptime

This command configures the ARP request response timeout.

The value for <seconds> is a valid positive integer, which represents the IP ARP entry response timeout time in seconds. The range for <seconds> is between 1-10 seconds.

Default

l

Format

arp resptime <1-10>

Mode

Global Config

no arp resptime

 

This command configures the default ARP request response timeout.

Format

no arp resptime

Mode

Global Config

 

 

Routing Commands

10-3

202-10088-01, March 2005

Page 235
Image 235
NETGEAR NETGEAR user manual Arp dynamicrenew, Arp purge, Arp resptime, No arp dynamicrenew, No arp resptime