NETGEAR NETGEAR user manual Routing Information Protocol RIP Commands, Show ip vlan, Enable RIP

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Mode VLAN Database

show ip vlan

This command displays the VLAN routing information for all VLANs with routing enabled in the system.

Format	show ip vlan
Mode	Privileged EXEC and User EXEC

MAC Address used by Routing VLANs Is the MAC Address associated with the internal bridge-router interface (IBRI). The same MAC Address is used by all VLAN routing interfaces. It will be displayed above the per-VLAN information.

VLAN ID	Is the identifier of the VLAN.
Logical Interface	Indicates the logical slot/port associated with the VLAN routing
	interface.
IP Address	Displays the IP Address associated with this VLAN.
Subnet Mask	Indicates the subnet mask that is associated with this VLAN.

Routing Information Protocol (RIP) Commands

This chapter provides a detailed explanation of the RIP commands. The commands are divided by functionality into the following different groups:

•Show commands are used to display switch settings, statistics and other information.

•Configuration Commands are used to configure features and options of the switch. For every configuration command there is a show command that will display the configuration setting.

•Copy commands are used to transfer configuration and informational files to and from the switch.

enable (RIP)

This command resets the default administrative mode of RIP in the router (active).

Default	enabled
Format	enable
Mode	Router RIP Config
10-22	Routing Commands

202-10088-01, March 2005