NETGEAR NETGEAR user manual Set igmp groupmembershipinterval, No set igmp groupmembershipinterval

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Mode Vlan Mode

no set igmp

This command disables IGMP snooping on a particular VLAN, and in turn disabling IGMP snooping on all interfaces participating in this VLAN.

Format	no set igmp <vlanId>
Mode	Vlan Mode

set igmp groupmembershipinterval

This command sets the IGMP Group Membership Interval on a particular VLAN. The Group Membership Interval time is the amount of time in seconds that a switch will wait for a report from a particular group on a particular interface, which is participating in the VLAN, before deleting the interface from the entry. This value must be greater than IGMP Maximum Response time value. The range is 2 to 3600 seconds.

Default	260 seconds
Format	set igmp groupmembershipinterval <vlanId> <2-3600>
Mode	Vlan Mode

no set igmp groupmembershipinterval

This command sets the IGMP Group Membership Interval time on a particular VLAN to the default value.

Format	no set igmp groupmembershipinterval <vlanId>
Mode	Vlan Mode

set igmp maxresponse

This command sets the IGMP Maximum Response time on a particular VLAN. The Maximum Response time is the amount of time in seconds that a switch will wait after sending a query on an interface, which is participating in the VLAN, because it did not receive a report for a particular group in that interface. This value must be less than the IGMP Query Interval time value. The range is 1 to 3599 seconds.

Default	10 seconds
8-110	Switching Commands

202-10088-01, March 2005