NETGEAR NETGEAR Show mac access-list name, Show mac access-lists, No mac access-group name inout

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

no mac access-group <name> {inout}

This command removes a MAC ACL identified by <name> from the interface in a given direction.

Format	no mac	access-list <name> {inout}
Mode	Global	Config or Interface Config

show mac access-list <name>

This command displays a MAC access list and all of the rules that are defined for the ACL. The <name> parameter is used to identify a specific MAC ACL to display.

Format	show mac access-list <name>
Mode	Privileged EXEC
Rule Number	The ordered rule number identifier defined within the ACL.
Action	Displays the action associated with each rule. The possible val-
	ues are Permit or Deny.
Source MAC Address	Displays the source MAC address for this rule.
Source MAC Mask	Displays the source MAC mask for this rule.
Destination MAC Address	Displays the destination MAC address for this rule.
Destination MAC Mask	Displays the destination MAC mask for this rule.
Ethertype	Displays the Ethertype keyword or custom value for this rule.
VLAN ID	Displays the VLAN identifier value or range for this rule.
COS	Displays the COS (802.1p) value for this rule.
Secondary VLAN ID	Displays the Secondary VLAN identifier value or range for this
	rule.
Secondary COS	Displays the Secondary COS (802.1p) value for this rule.
Assign Queue	Displays the queue identifier to which packets matching this rule
	are assigned.
Redirect Interface	Displays the slot/port to which packets matching this rule are for-
	warded.

show mac access-lists

This command displays a summary of all defined MAC access lists in the system.

Format	show mac access-lists
Mode	Privileged EXEC
Name	The name of the MAC access list.
Number of Rules	The number of user-configured rules defined for this ACL.
11-4	Quality of Service (QoS) Commands

202-10088-01, March 2005