NETGEAR NETGEAR user manual Show ip rip interface brief, Send Version, Receive Version, RIP Mode

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Auto Summary Mode	Select enable or disable from the pulldown menu. If you select
	enable groups of adjacent routes will be summarized into single
	entries, in order to reduce the total number of entries The default
	is enable.
Host Routes Accept Mode	Select enable or disable from the pulldown menu. If you select
	enable the router will be accept host routes. The default is enable.
Global Route Changes	The number of route changes made to the IP Route Database by
	RIP. This does not include the refresh of a route's age.
Global queries -	The number of responses sent to RIP queries from other sys-
	tems.Default Metric
	Sets a default for the metric of redistributed routes.This field dis-
	plays the default metric if one has already been set or blank if not
	configured earlier. The valid values are (1 to 15)
Default Metric	Sets a default for the metric of redistributed routes.This field dis-
	plays the default metric if one has already been set or blank if not
	configured earlier. The valid values are (1 to 15)
Default Route Advertise	The default route.

show ip rip interface brief

This command displays general information for each RIP interface. For this command to display successful results routing must be enabled per interface (i.e. ip rip).

Format	show ip rip interface brief
Mode	Privileged EXEC and User EXEC
Slot/Port	Valid slot and port number separated by forward slashes.
IP Address	The IP source address used by the specified RIP interface.
Send Version	The RIP version(s) used when sending updates on the specified
	interface. The types are none, RIP-1, RIP-1c, RIP-2.
Receive Version	The RIP version(s) allowed when receiving updates from the
	specified interface. The types are none, RIP-1, RIP-2, Both
RIP Mode	RIP administrative mode of router RIP operation; enable acti-
	vates, disable de-activates it.
Link State	The mode of the interface (up or down).

Routing Commands 10-29

202-10088-01, March 2005