NETGEAR NETGEAR Policy Name, Mark IP Dscp, Mark IP Precedence, Policing Style, Peak Rate Kbps

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

	ing action. It may also be specified along with a QoS queue
	assignment.
If the Policy Name is specified the following fields are displayed:
Policy Name	The name of this policy.
Type	The policy type, namely whether it is an inbound or outbound
	policy definition.

The following information is repeated for each class associated with this policy (only those policy attributes actually configured are displayed):

Class Name	The name of this class.
Mark CoS	Denotes the class of service value that is set in the 802.1p header
	of outbound packets. This is not displayed if the mark cos was not
	specified.
Mark IP DSCP	Denotes the mark/re-mark value used as the DSCP for traffic
	matching this class. This is not displayed if mark ip description is
	not specified using the police-two-rate command, or if policing is
	in use for the class under this policy.
Mark IP Precedence	Denotes the mark/re-mark value used as the IP Precedence for
	traffic matching this class. This is not displayed if precedence is
	not specified using police-two-rate command, or if either mark
	DSCP or policing is in use for the class under this policy.
Policing Style	This field denotes the style of policing, if any, used (simple, sin-
	gle rate, or two rate).

Committed Rate (Kbps) This field displays the committed rate, used in simple policing, single-rate policing, and two-rate policing.

Committed Burst Size (KB) This field displays the committed burst size, used in simple policing, single-rate policing, and two-rate policing.

Excess Burst Size (KB) This field displays the excess burst size, used in single-rate polic- ing.

Peak Rate (Kbps)	This field displays the peak rate, used in two-rate policing.
Peak Burst Size (KB)	This field displays the peak burst size, used in two-rate policing.
Conform Action	The current setting for the action taken on a packet considered to
	conform to the policing parameters. This is not displayed if polic-
	ing is not in use for the class under this policy.
11-34	Quality of Service (QoS) Commands

202-10088-01, March 2005