NETGEAR NETGEAR user manual Router Discovery Protocol Commands, Ip irdp address, No ip irdp

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Requests Received Is the number or requests received.

Requests Relayed Is the number of requests relayed.

Packets Discarded Is the number of packets discarded.

Router Discovery Protocol Commands

This chapter provides a detailed explanation of the Router Discovery commands. The commands are divided by functionality into the following different groups:

•Show commands are used to display switch settings, statistics and other information.

•Configuration Commands are used to configure features and options of the switch. For every configuration command there is a show command that will display the configuration setting.

•Copy commands are used to transfer configuration and informational files to and from the switch.

ip irdp

This command enables Router Discovery on an interface.

Default	enabled
Format	ip irdp
Mode	Interface Config
no ip irdp

This command disables Router Discovery on an interface.

Format	no ip irdp
Mode	Interface Config

ip irdp address

This command configures the address to be used to advertise the router for the interface. The valid values for ipaddr are 224.0.0.1 and 255.255.255.255.

Default	224.0.0.1
Format	ip irdp address <ipaddr>
10-18	Routing Commands

202-10088-01, March 2005