NETGEAR NETGEAR Mtu, Network javamode, Network mac-address, No mtu, No network javamode

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

mtu

This command sets the maximum transmission unit (MTU) size (in bytes) for physical and port- channel (LAG) interfaces. For the standard implementation, the range of <mtusize> is a valid integer between 1522-9216.

Default	1522
Format	mtu <1522-9216>
Mode	Interface Config
no mtu

This command sets the default maximum transmission unit (MTU) size (in bytes) for the interface.

Format	no mtu
Mode	Interface Config

network javamode

This command specifies whether or not the switch should allow access to the Java applet in the header frame of the Web interface. When access is enabled, the Java applet can be viewed from the Web interface. When access is disabled, the user cannot view the Java applet.

Default	enabled
Format	network javamode
Mode	Privileged EXEC
no network javamode

This command disallows access to the Java applet in the header frame of the Web interface. When access is disabled, the user cannot view the Java applet.

Format	no network	javamode
Mode	Privileged	EXEC

network mac-address

This command sets locally administered MAC addresses. The following rules apply:

Switching Commands 8-19

202-10088-01, March 2005