NETGEAR NETGEAR user manual Show logging, Show mac-addr-table

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

show logging

This command displays the trap log maintained by the switch. The trap log contains a maximum of 256 entries that wrap.

Format	show logging
Mode	Privileged EXEC

Number of Traps since last reset The number of traps that have occurred since the last reset of this device.

Number of Traps since log last displayed The number of traps that have occurred since the traps were last displayed. Getting the traps by any method (terminal interface display, Web display, upload file from switch etc.) will result in this counter being cleared to 0.

Log	The sequence number of this trap.
System Up Time	The relative time since the last reboot of the switch at which this
	trap occurred.
Trap	The relevant information of this trap.
Note:	Trap log information is not retained across a switch reset.

show mac-addr-table

This command displays the forwarding database entries. If the command is entered with no parameter, the entire table is displayed. This is the same as entering the optional all parameter. Alternatively, the administrator can enter a MAC Address to display the table entry for the requested MAC address and all entries following the requested MAC address.

Format	show mac-addr-table [<macaddr> all]
Mode	Privileged EXEC

Mac Address A unicast MAC address for which the switch has forwarding and or filtering information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes.

Slot/Port	The port which this address was learned.
if Index	This object indicates the ifIndex of the interface table entry asso-
	ciated with this port.
Status	The status of this entry. The meanings of the values are:
Switching Commands	8-13

202-10088-01, March 2005