NETGEAR NETGEAR user manual Mode

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

If the ‘port-priority’ token is specified, this command sets the priority for this port within a specific multiple spanning tree instance or the common and internal spanning tree instance, depending on the <mstid> parameter. The port-priority value is a number in the range of 0 to 240 in increments of 16.

Defaultcost : auto external-cost : auto port-priorty : 128

Format spanning-tree mst <mstid> {{cost <1-200000000> auto }

	{external-cost <1-200000000> auto } port-priority
	<0-240>}
Mode	Interface Config
no spanning-tree mst

This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance or in the common and internal spanning tree to the respective default values. If the <mstid> parameter corresponds to an existing multiple spanning tree instance, then the configurations are done for that multiple spanning tree instance. If however 0 (defined as the default CIST ID) is passed as the <mstid>, then the configurations are performed for the common and internal spanning tree instance.

If the ‘cost’ token is specified, this command sets the path cost for this port within a multiple spanning tree instance or the common and internal spanning tree instance, depending on the <mstid> parameter, to the default value, i.e. a pathcost value based on the Link Speed.

If the ‘external-cost’ token is specified, this command sets the external path cost for this port for mst ‘0’ instance, to the default value, i.e. a pathcost value based on the Link Speed.

If the ‘port-priority’ token is specified, this command sets the priority for this port within a specific multiple spanning tree instance or the common and internal spanning tree instance, depending on the <mstid> parameter, to the default value, i.e. 128.

Format	no spanning-tree mst <mstid> <cost external-cost
	port-priority>
Mode	Interface Config

spanning-tree hello-time

8-134 Switching Commands

202-10088-01, March 2005