User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

transport output telnet

This command regulates new outbound telnet connections. If enabled, new outbound telnet sessions can be established until it reaches the maximum number of simultaneous outbound telnet sessions allowed. If disabled, no new outbound telnet session can be established. An established session remains active until the session is ended or an abnormal network error ends it.

Default

enabled

Format

transport output telnet

Mode

Line Config

no transport output telnet

 

This command disables new outbound telnet connections. If disabled, no new outbound telnet connection can be established.

Format

no transport output telnet

Mode

Line Config

session-limit

This command specifies the maximum number of simultaneous outbound telnet sessions. A value of 0 indicates that no outbound telnet session can be established.

Default

5

Format

session-limit <0-5>

Mode

Line Config

no session-limit

This command sets the maximum number of simultaneous outbound telnet sessions to the default value.

Format

no session-limit

Mode

Line Config

session-timeout

This command sets the outbound telnet session timeout value.The timeout value unit of time is minutes. A value of 0 indicates that a session remains active indefinitely.

Switching Commands

8-17

202-10088-01, March 2005

Page 85
Image 85
NETGEAR NETGEAR user manual Transport output telnet, Session-limit, Session-timeout