NETGEAR NETGEAR user manual Conventions, Macaddr

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

logical slot/port This parameter denotes a logical slot number and logical port number assigned. This is applicable in the case of a port-channel (LAG). The operator can use the logical slot number and the logi- cal port number to configure the port-channel.

Conventions

Network addresses are used to define a link to a remote host, workstation or network. Network addresses are shown using the following syntax:

Table 5-1.	Network Address Syntax
Address Type		Format	Range
ipaddr		A.B.C.D	0.0.0.0 to 255.255.255.255
			(decimal)
macaddr		YY:YY:YY:YY:YY:YY	hexidecimal digit pairs

Double quotation marks such as "System Name with Spaces" set off user defined strings. If the operator wishes to use spaces as part of a name parameter then it must be enclosed in double quotation marks.

Empty strings (““) are not valid user defined strings.

Command completion finishes spelling the command when enough letters of a command are typed to uniquely identify the command word. The command may be executed by typing <enter> (command abbreviation) or the command word may be completed by typing the <tab> or <space bar> (command completion).

The value 'Err' designates that the requested value was not internally accessible. This should never happen and indicates that there is a case in the software that is not handled correctly.

The value of '-----' designates that the value is unknown.

Command Line Interface Structure 5-3

202-10088-01, March 2005