User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Policy Attribute Table Size The current number of entries (rows) in the Policy Attribute Table.

Policy Attribute Table Max The maximum allowed entries (rows) for the Policy Attribute Table.

Service Table Size The current number of entries (rows) in the Service Table.

Service Table Max The maximum allowed entries (rows) for the Service Table.

show policy-map

This command displays all configuration information for the specified policy. The <policyname> is the name of an existing DiffServ policy.

Format

show policy-map

[policyname]

Mode

Policy-classmap

Config

Mark Secondary COS Denotes the secondary class of service value that is set in the

 

802.1p header of outbound packets. This is not displayed if the

 

mark secondary-cos was not specified.

Conform COS

The action to be taken on conforming packets per the policing

 

metrics.

Conform Secondary COS The action to be taken on packets conforming with the second- ary class of service value per the policing metrics.

Exceed COS The action to be taken on excess packets per the policing metrics.

Exceed Secondary COS The action to be taken on excess packets conforming with the secondary class of service value per the policing metrics.

Non-Conform COS The action to be taken on violating packets per the policing met- ric.

Non-Conform Secondary COS The action to be taken on violating packets conforming with the secondary class of service per the policing metric.

Assign Queue

Directs traffic stream to the specified QoS queue. This allows a

 

traffic classifier to specify which one of the supported hardware

 

queues are used for handling packets belonging to the class.

Drop

Drop a packet upon arrival. This is useful for emulating access

 

control list operation using DiffServ, especially when DiffServ

 

and ACL cannot co-exist on the same interface.

 

Redirect

Forces a classified traffic stream to a specified egress port (physi-

 

cal or LAG). This can occur in addition to any marking or polic-

 

 

Quality of Service (QoS) Commands

11-33

202-10088-01, March 2005

Page 295
Image 295
NETGEAR NETGEAR user manual Show policy-map, Conform COS, Assign Queue