NETGEAR NETGEAR user manual Next-server, Option, No netbios-node-type, No next-server

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Format	netbios-node-type <type>
Mode	DHCP Pool Config

no netbios-node-type

This command removes the NetBIOS node Type.

Format	no netbios-node-type
Mode	DHCP Pool Config

next-server

This command configures the next server in the boot process of a DHCP client.

Address is the IP address of the next server in the boot process, which is typically a Trivial File Transfer Protocol (TFTP) server.

Default	If the next-server command is not used to configure a boot server list, the DHCP
	Server uses inbound interface helper addresses as boot servers.
Format	next-server <address>
Mode	DHCP Pool Config
no next-server

This command removes the boot server list.

Format	no next-server
Mode	DHCP Pool Config

option

The command configures DHCP Server options. Code specifies the DHCP option code. Ascii string specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. Hex string specifies hexadecimal data. in hexadecimal character strings is two hexadecimal digits—each byte can be separated by a period, colon, or white space.

Example :a3:4f:22:0c / a3 4f 22 0c / a34f.220c.9fed The <address> specifies an IP address.

Defaultnone

8-90 Switching Commands

202-10088-01, March 2005