NETGEAR NETGEAR user manual Show radius statistics

The configured IP address of the authentication server

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Number of configured servers

Max number of retransmits The configured value of the maximum number of times a request packet is retransmitted

Timeout Duration	The configured timeout value, in seconds, for request re-trans-
	missions
Accounting Mode	Yes or No

If the optional token 'servers' is included, the following information regarding the configured RADIUS servers is displayed.

IP Address	IP Address of the configured RADIUS server
Port	The port in use by this server
Type	Primary or secondary
Secret Configured	Yes / No
Message Authenticator	Enables or disables. the message authenticator attribute for the
	selected server

show radius statistics

This command is used to display the statistics for RADIUS or configured server . To show the configured RADIUS server statistic, the IP Address specified must match that of a previously configured RADIUS server. On execution, the following fields are displayed.

Format	show radius statistics [ipaddr]
Mode	Privileged EXEC

If ip address is not specified than only Invalid Server Address field is displayed. Otherwise other listed fields are displayed.

Invalid Server Addresses The number of RADIUS Access-Response packets received from unknown addresses.

Server IP Address	IP Address of the Server.
Round Trip Time	The time interval, in hundredths of a second, between the most recent Access-
	Reply Access-Challenge and the Access-Request that matched it from the
	RADIUS authentication server.
Access Requests	The number of RADIUS Access-Request packets sent to this
	server. This number does not include retransmissions.
Security Commands	9-21

202-10088-01, March 2005