NETGEAR NETGEAR user manual Enter the ip dhcp pool

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Table 7-1.	Command Mode (continued)
Command Mode		Access Method	Prompt	Exit or Access Next
				Mode
VLAN Mode		From the Privileged	Switch (Vlan) #	To exit to the Privileged
		User Exec mode, enter		Exec mode, enter the
		the vlan database		exit command, or press
		command.		Ctrl-Z to switch to user
				exec mode.
Global Config Mode		From the Privileged	Switch (Config)#	To exit to the Privileged
		Exec mode, enter the		Exec mode, enter the
		configure command.		exit command, or press
				Ctrl-Z to switch to user
				exec mode.
Interface Config Mode		From the Global	Switch (Interface-"if	To exit to the Global
		Configuration mode,	number")#	Config mode enter exit.
		enter the interface		To return to user EXEC
		config <slot/port>		mode enter ctrl-Z.
		command.
Line Config Mode		From the Global	Switch (line) #	To exit to the Global
		Configuration mode,		Config mode enter exit.
		enter the lineconfig		To return to User Exec
		command.		mode enter ctrl-Z.
Policy Map Mode		From the Global	Switch (Config-policy-	To exit to the Global
		Configuration mode,	map)#	Config mode enter exit.
		enter the policy map		To return to user EXEC
		command.		mode enter ctrl-Z.
Policy Class Mode		From the Policy Map	Switch (Config-policy-	To exit to Policy Map
		mode enter the class	classmap)#	mode enter exit. To
		command.		return to User Exec
				mode enter ctrl-Z.
Class Map Mode		From the Global Config	Switch (Config-class-	To exit to Global Config
		mode, enter the class-	map)#	mode enter exit. To
		map command.		return to User Exec
				mode enter ctrl-Z.
Router Config RIP		From the Global Config	Switch (Config-router)#	To exit to the Global
Mode		mode, enter the router		Config mode enter exit.
		rip command		To return to User Exec
				mode enter ctrl-Z.
DHCP Pool		From the Global	Routing (Config-dhcp-	To exit to Global
Configuration Mode		Configuration mode,	pool)	Configuration mode
		enter the ip dhcp pool		enter exit. To return to
		<pool-name>		user EXEC mode, enter
		command.		ctrl-Z
7-2				Mode-based CLI

202-10088-01, March 2005