NETGEAR NETGEAR user manual Sntp server, Show sntp

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

no sntp multicast client poll-interval

This command will reset the poll interval for SNTP multicast clients to its default value.

Format	no sntp multicast client poll-interval
Mode	Global Config

sntp server

This command configures an SNTP server (with a maximum of three) where the server address can be an ip address or a domain name and the address type either ipv4 or dns. The optional priority can be a value of 1-3, the version a value of 1-4, and the port id a value of 1-65535.

Format	sntp server <ipaddress/domain-name> <addresstype>
	[<priority> [<version> [<portid>]]]
Mode	Global Config
no sntp server

This command deletes an server from the configured SNTP servers.

Format	no sntp server remove <ipaddress/domain-name>
Mode	Global Config

show sntp

This command is used to display SNTP settings and status.

Format	show sntp
Mode	Privileged Exec
Last Update Time	Time of last clock update.
Last Attempt Time	Time of last transmit query (in unicast mode).
Last Attempt Status	Status of the last SNTP request (in unicast mode) or unsolicited
	message (in broadcast mode).
Broadcast Count	Current number of unsolicited broadcast messages that have been
	received and processed by the SNTP client since last
	reboot.

Switching Commands 8-75

202-10088-01, March 2005