NETGEAR NETGEAR user manual Spanning-tree port mode all, Spanning-tree bpdumigrationcheck

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

spanning-tree port mode all

This command sets the Administrative Switch Port State for all ports to enabled.

Default	disabled
Format	spanning-tree port mode all
Mode	Global Config

no spanning-tree port mode all

This command sets the Administrative Switch Port State for all ports to disabled.

Format	no spanning-tree port mode all
Mode	Global Config

spanning-tree

This command sets the STP mode for a specific port-channel (LAG). This is the value specified for STP Mode on the Port Configuration Menu. 802.1D mode is the default. The interface is a logical slot/port for a configured port-channel. The all option sets all configured port-channels (LAGs) with the same option.

Format	spanning-tree		{<logical slot/port> all <off
	802.1d	fast>}
Mode	Global	Config

The mode is one of the following:

802.1d	IEEE 802.1D-compliant STP mode is used
fast	Fast STP mode is used
off	STP is turned off

spanning-tree bpdumigrationcheck

This command enables BPDU migration check on a given interface. The all option enables BPDU migration check on all interfaces.

Format	spanning-tree	bpdumigrationcheck {<slot/port> all}
Mode	Global Config
8-126		Switching Commands

202-10088-01, March 2005