3Com 7600 manual Enable Lecs, Address via Ilmi, LES address for the LEC of bridge #0 is entered

Update LES Address 8-7

Update LES Address Enter the bridge number and ATM address (or ! to invalidate the address) to update the LES address. For general information about LECs see “LAN Emulation Overview” on page 12-5.

Table 8-7Task Actions

Menu
Sequence	Enter		Result
[5] le	1	Bridge Number {0-3}	Q ATM address: Update the
[2] config	2	LES ATM address or “!”	specified LES ATM address for
[6] les-addr			specified bridge

Q “!”: Invalidates the LES ATM address

Example

Enter: [5][2][4] 0 4700000009000000000000000000c0da60000000

The LES address for the LEC of bridge #0 is entered.

Enable LECS	Enable the option to obtain the LECS address via the ILMI. Each
Address via ILMI	application of the command toggles the option on or off. The change will
	take place after the next reset. For general information about LECSs see
	“LAN Emulation Overview” on page 12-5.
	Table 8-8Task Actions

Menu	Enter	Result
Sequence
[5] le	None	Q The option to obtain the
[2] config		LECS address via ILMI is
[7] mode-lecs		toggled on or off. The
		default is off.

Example

Enter: [5][2][7]

The option to obtain the LECS address via ILMI is toggled on or off.