3Com 7600 manual 3LEC Configuration and Status Information, Elan Name

Emulated LAN Connections 12-9

Figure 12-1VCCs in LAN Emulation Components

LEC Configuration The following information about the configuration of the bridge LEC in and Status the ELAN to which it belongs including connections to LECS, LES and BUS

Information can be displayed to the operator (see “Display Current LEC Configuration” on page 8-4).

Table 12-3LEC Configuration and Status Information

LECS Information	Description
ATM Address	The ATM address of the LECS. This address is obtained from the attached ATM Switch
	during initialization of the LEC. It is obtained via ILMI or, alternatively, retrieved from
	flash (manually assigned). If the address is not available by these methods, the
	well-knownaddress is used to open a configuration VCC. The well-known address is
	displayed in this case.
Config VCC	VPI/VCI values of the configuration VCC to the LECS. It is an VCC which is determined
	during initialization of the LEC using the above LECS ATM address.

LES Information	Description
ELAN Name	The alphanumeric name of the Emulated LAN (ELAN) to which the LEC belongs. A
	default physical name is automatically provided when the LEC joins the ELAN. This
	physical name can be replaced with a descriptive name by management.
LEC ID	LAN Emulation Client (LEC) identification assigned by the LES.