Enter or Modify a Static Address in FDB 6-19
Enter or Modify a Static Address in FDB
Add a new static address to the FDB or update an existing one. The static
entry is added to the Forwarding Database or updated with new
destinations if it exists. A new entry is given a permanent status. Other
status values may be given using an SNMP manager. For more
information about static entries in the Forwarding Database see “Static
Addresses” on page 11-8.
Example
Enter: [3] [3] [4] 0 0180c2000000 1 2
In the static Forwarding Database of bridge #0, the MAC address
0180c2000000 is allowed for input bridge-port #1 and output bridge port
#2.
Block a Static Address
Specify bridge-ports on which communication is blocked for a static
address in the FDB. For more information about static entries in the
Forwarding Database see “Static Addresses” on page 11-8.
The blocked input and output bridge ports are specified by single
hexadecimal numbers as in Table 6-20.
Table6-24 Task Actions
Menu
Sequence Enter Result
[3] bridge
[3] fdb
[4] allow
1Bridge number {0-3}
2Station address (MAC address)
3Input bridge-port number {0-5,
(0 for all ports)}
4Output bridge-port number(s)
{1-5} and
Member ID (for the ATM port)
If the station address does not
exist in the static address table
of the FDB, it is added to it and
receives the permanent status.
If the address already exists, the
ports are updated if they are
different from those specified.
abtthgde.book Page 19 Tuesday, June 23, 1998 10:29 AM