3Com 7600 manual Bridges, Both local and remote destination LANs in the ATM network

12-10CHAPTER 12: ATM, LAN EMULATION, AND VIRTUAL LANS

Table 12-3LEC Configuration and Status Information (continued)

ATM Address	ATM address of the LES provided by the LECS during the configuration phase or
	manually assigned using the LES address option of the LE configuration menu or in Fast
	Setup.
Control-direct VCC	VPI/VCI values of the control-direct VCC originated by the LEC to the LES.
Control-distribute VCC	VPI/VCI values of the control-distribute VCC originated by the LES to the LEC.
BUS Information	Description
ATM Address	ATM address of the BUS provided by the LES during initialization.
Multicast-send VCC	VPI/VCI values of the multicast-send VCC originated by the LEC to the BUS.
Multicast-forward VCC	VPI/VCI values of the multicast-forward VCC originated by the BUS to the LEC.

Bridges in the 7600	In the 7600 Card a LEC is attached to each Ethernet transparent bridge
Card	which is set up in the device. The LEC connects the bridged-LAN
	environment attached to the transparent bridge to the ATM network and
	forwards LAN data frames over VCCs across the ATM network to the
	destination LANs. From the viewpoint of a LAN user, the LEC acts
	together with the transparent bridge to which it is attached to form a
	combined bridge through which the LAN user can now efficiently reach
	both local and remote destination LANs in the ATM network.
	The physical connection of the transparent bridge to the ATM network is
	through an internal ATM port. The connection to the ATM port is
	specified when the bridge is set up. If no ATM connection is specified, the
	bridge acts like a standard transparent bridge.