3Com 7600 manual Integrated Fast Setup is initiated from the LMA Main Menu, Operation

		CELLplex 7000 Integrated Fast Setup 3-5
Integrated Fast Setup		The Integrated Fast Setup is initiated from the LMA Main Menu of the
	Operation	CELLplex 7000. The CELLplex Main Menu appears as follows:
CP7000 switch module - Main Menu:
	(1) SYS: Platform config ->
(2)	LEM: Lan Emulation ->
(3)	CON: Connections ->
(4)	STS: Statistics ->
(5)	DIA: Testing & Diagnostics ->
(6)	FTR: ATM features
(7)	LOG: Logout
(8)	VER: Version
(9)	FST: Fast Setup
(10)	DBG: Debug ->
[ ‘\’ -Main,		‘-’ -Back in menus]
[ ‘=0’-To switch, ‘=n’-To i/f card n (1-4)]
>
		Select the menu item: (9) FST: Fast Setup
		Note that the Integrated Fast Setup “Full” setup mode may override any
		specific configurations that have previously been carried out in any of the
		installed Interface Cards. The following warning message is displayed
		when this is about to occur:
		***Note: Full fast setup, special module configuration will
		be overridden.