3Com 7600 manual Attributes of port #1 of bridge #0 are displayed as follows

Disable Bridge-port 6-27

The attributes of port #1 of bridge #0 are displayed as follows:

bridge #0 port #1 STP Attributes:

====================================

Bridge-port Priority= 128

Bridge-port State= forwarding

Bridge-port Path Cost= 100

Bridge-port Designated Root= 800000c0da1800a0

Bridge-port Designated Cost= 0

Bridge-port Designated Bridge= 800000c0da1800a0

Bridge-port Designated port= 8001

Bridge-port Forward Transitions= 1

Figure 6-10Bridge-port STP Attributes Display.

Disable Bridge-portDisable and enable a bridge-port for a specified bridge for management.

Table 6-37	Task Actions
Menu	Enter		Result
Sequence
[3] bridge	1	Bridge number {0-3}	(D)isables or (e)nables this
[4] stp	2	Bridge-port Number {1-5}	bridge-port for management.
[3] port
	3
[4] status		D(isable)/E(nable)

Example

Enter: [3] [4] [3] [4] 0 1 D

Disables bridge-port 1 on bridge 0.

Update Bridge-portUpdate bridge-port STP parameters: bridge-port-priority and

STP parameters bridge-path-cost (see “Management Bridge Parameters” on page 11-8 for more information about the STP parameters).

Update Bridge-port-Update the STP parameter bridge-port-priority for a specified bridge. priority