3Com 7600 manual Attach Fast, Ethernet Port to, Enter 6 Following is displayed, 1Task Actions

5-2CHAPTER 5: CONFIGURING VIRTUAL LANS

Table 5-1Task Actions

Menu	Enter	Result
Sequence
[6] vns	None	Current bridge configuration
[1] display		parameters are displayed

Table 5-2Bridge Configuration Parameters

Parameter	Description
Bridge	The bridge number
Fast Ethernet Ports	The Fast Ethernet ports assigned to the bridge.
ATM	Q Yes: The internal ATM downlink port is assigned to
	the bridge (i.e., the bridge is connected to an ELAN)
	Q No: The internal ATM downlink port is not assigned
	to the bridge
ELAN name	The ELAN name (if connected).

Example

Enter: [6] [1]

The following is displayed:

----------------------------------------------------------------------------
Bridge				Ethernet ports		ATM	ELAN name (ATM)
+	--------	+-------------------------			+	-----+----------------------------------
	0		1-2		YES elan3576_0
	1		3-4		YES elan3576_1

	Figure 5-1Bridge Configuration Display
Attach Fast	Enter the bridge number and a Fast Ethernet port to attach a specific Fast
Ethernet Port to	Ethernet port to the bridge. The initial default configuration is a single
Bridge	bridge that includes all Fast Ethernet ports and an ATM connection. For
	general information about bridges see “Bridges in the 7600 Card” on
	page 12-10.