3Com 7600 manual Display STP Enable, Status, Disable STP on, Following is displayed

Display STP Enable Status 6-21

In the static Forwarding Database of bridge #0, the MAC address 0180c2000000 is removed for input bridge-port #1.

Display STP Enable	Display STP enable status for all bridges. For general information about
Status	the STP see “Spanning Tree Protocol” on page 11-8. For more
	information about the STP enable status see “Disabling the STP” on page
	11-10.
	Table 6-27Task Actions

Menu
Sequence	Enter	Result
[3] bridge	None	The STP enable/disable status is
[4] stp		displayed for this bridge.
[1] display

	Example
	Enter: [3] [4] [1]
	The following is displayed:
		STP Status
		-----------
		Bridge #0: STP is Disabled
	Figure 6-8STP Enable Status Display
Disable STP on	Disable and enable the STP on a specified bridge. For more information
Bridge	about the STP enable status see “Disabling the STP” on page 11-8.
	Table 6-28Task Actions

Menu	Enter		Result
Sequence
[3] bridge	1	Bridge number {0-3}	(D)isables or (E)nables STP on
[4] stp	2	D(isable)/E(nable)	this bridge.
[4] status