Update LEC Operational Parameters 8-9
Example
Enter: [5][3][1] 0
The LEC operational information for the LEC of bridge #0 is displayed as
follows:
Figure8-3 LE C Operational Parameters Display
Update LEC Operational Parameters
Update the LEC operational parameters: control-timeout,
VCC-timeout-period, aging-time, forward-delay-time,
topology-change-flag, expected LE_ARP response-time, flush-timeout,
path-switching-delay and connection-completion-timer. For more
information see “LEC Parameters” on page 12-16.
Control-timeout Enter the bridge number and control-timeout value to update the
control-timeout parameter in seconds.
Example
Enter: [5][3][2] 0 100
----------------------------------------------------------
Control Timeout= 120
VCC Timeout= 1200
Aging Time= 300
Forward Delay Time= 15
Expected LE ARP Resp Time= 1
Topology change flag= OFF
Flush Timeout= 4
Path Switching Delay= 6
Connection Completion Timer= 4
----------------------------------------------------------
Table8-11 Task Actions
Menu
Sequence Enter Result
[5] le
[3] operational
[2] control
1Bridge Number {0-3}
2Control-timeout {10-300}
The control-timeout parameter
is updated for the specified
bridge.
abtthgde.book Page 9 Tuesday, June 23, 1998 10:29 AM