3Com 7600 manual Set Store-and, Forward Mode, After the next reset

Set Store-and- Forward Mode 10-7

The system configuration mode is set according to following prompt. The current mode is displayed after the colon. To accept it press “enter”; to change it type over the new choice and press “enter”.

Select system mode (L<E>): L

Set Store-and-	Set the desired store-and-forward mode. The mode is saved in flash. The
Forward Mode	mode set applies to all frames arriving from all Ethernet ports and all
	frames arriving from the ATM ports. This mode change takes effect only
	after the next reset.
	Table 10-7		Task Actions
		Menu	Enter	Result
		Sequence

[1] system [3] Enter
update [6]	S<&f> or C<utthru>
s&f

QStore & forward - the entire frame is received before being forwarded to its destination.

QCut-through - the cells of the frame are forwarded to their destination before the entire frame is received

Example

Enter: [1] [3] [6]

The store-and-forward mode is set according to following prompt. The current mode is displayed after the colon. To accept it press “enter”; to change it type over the new choice and press “enter”.

Select mode (S<&F>, C<utThru>): C