3Com 7600 manual Display Current IP, 2IP Configuration Information

9-2CHAPTER 9: SETTING NETWORK PARAMETERS

Display Current IP	Displays the current IP configuration for each of the bridges (refer to
Configuration	Table 9-2).
	Table 9-1Task Actions

Menu Sequence	Enter	Result
[7] management	None	Current IP configuration
[1] ip		parameters are displayed for
[1]display		all bridges

Table 9-2IP Configuration Information

Parameter	Description
Bridge	The number of the bridge (virtual network).
IP addr	The IP address of the bridge.
Subnet Mask	The IP address bit mask of the subnet where the specified bridge
	is located. Applying the subnet mask on the IP address
	(depending on its class - A, B or C) determines the IP address;
	subnet address.
Def. Gateway	The IP address of the default gateway (router) connected to the
	specified bridge. The default gateway is only required if routers
	are being used in the network. There can be only one router
	defined per virtual network (Bridge).

Example

Enter: [7] [1] [1]

The following is displayed:

--------------------------------------------------------------------

Bridge:	0	IP	addr.	: 100.0.0.1	Subnet	Mask: 255.255.255.0
		Def. Gateway: 100.0.0.55
Bridge:	1	IP	addr.	: 100.0.2.2	Subnet	Mask: 255.255.255.0

Def. Gateway: 100.0.2.99

--------------------------------------------------------------------

Figure 9-1IP Configuration Display.

Update IP Address Enter the bridge number and the new IP Address to update the IP Address for the specified bridge.