3Com 7600 manual Example 1 for Tx port type, Fast Ethernet Tx port #1 is set to half duplex

6-8CHAPTER 6: FAST ETHERNET AND BRIDGE MANAGEMENT TASKS

Table 6-11Task Actions for Tx Port Type

Menu	Enter		Result
Sequence
[2] ethernet	1	Ethernet port number {1-4}	The Fast Ethernet Tx port
[4] update	2	Auto mode (N<on-Auto>,	attributes are updated.
		A<ll>, D<uplx>, S<peed>)
	3	*Speed (10,100)
	4	†Duplex (H<alf>, F<ull>)

* If “D” or “N” was entered in Step 2

† If “S” or “N” was entered in Step 2

Example 1 - for Tx port type

Enter: [2] [4] 1 H

The Fast Ethernet Tx port #1 is set to half duplex.

Example 2 - for Fx port type

Enter: [2] [4] 1 D 10

The Fast Ethernet Tx port #1 is set to automode for duplex and a fixed speed of 10 Mbps.

Bridge Attributes Display the mapping of the bridge-ports to the Fast Ethernet ports on the

and Statistics 7600 Card as well as other bridge attributes and statistics. For more information about bridges in Ethernet LANs see “Transparent Bridges” on page 11-6.

Table 6-12	Task Actions
Menu	Enter	Result
Sequence
[3] bridge	Bridge Number {0-3}	Bridge attributes and statistics are
[1] display		displayed