3Com 7600 manual 36Bridge-port STP Attributes

Models: 7600

1 210
Download 210 pages 23.06 Kb
Page 84
Image 84

6-26CHAPTER 6: FAST ETHERNET AND BRIDGE MANAGEMENT TASKS

Display Bridge-portDisplay all STP attributes for a specified bridge-port.

STP Attributes

Table 6-35

Task Actions

 

 

 

 

 

Menu

Enter

Result

Sequence

 

 

 

 

[3] bridge

1

Bridge number {0-3}

The STP attributes are displayed

[4] stp

2

Bridge-port number {0-5), (0

for this bridge-port.

[3] port

 

 

 

[1] display

for all ports)}

 

 

 

Table 6-36Bridge-port STP Attributes

Parameter

Description

 

 

Bridge-Port-

A 1-octet value that allows the network manager to influence the

Priority

choice of port when a bridge has two ports connected in a loop.

Bridge-Port-

The current state of the port: Disabled, Listening, Learning,

State

Forwarding, or Blocking.

Bridge-Port-

The cost to be added to the root-path-cost field to determine the

Path-Cost

cost of the path to the root through this port.

Bridge-Port-

ID of the bridge in the root-identifier parameter transmitted by

Designated-

the designated-Bridge for the LAN to which the port is attached.

Root

 

Bridge-Port-

Cost of the path to the root-bridge offered by the

Designated-

designated-port on the LAN to which this port is attached.

Cost

 

Bridge-Port-

ID of the bridge assumed to be the designated-bridge for the

Designated-

LAN associated with the port. The parameter is used: (a) together

Bridge

with the designated-port and port-identifier parameters for the

 

port to ascertain whether this port should be the designated-port

 

for the LAN to which it is attached; (b) to test the value of the

 

bridge Identifier parameter conveyed in received CBPDUs.

Bridge-Port-

The port-identifier of the bridge-port assumed to be the

Designated-

designated-port for the LAN associated with the port. The

Port

parameter is used: (a) together with the designated-bridge and

 

port-identifier parameters for the Port to ascertain whether this

 

Port should be the designated-port for the LAN to which it is

 

attached; (b) by management to determine the topology of the

 

bridged Local Area Network..

 

 

Example

Enter: [3] [4] [3] [1] 0 1

Page 84
Image 84
3Com 7600 manual 36Bridge-port STP Attributes