Star Micronics SP300 Series manual Control Codes Used for Line Spacing

FUNCTION

CODE

OUTLINE

FUNCTION

CODE

OUTLINE

Cancel highlighted print mode

<ESC> “5” (1B)H (35)H

Cancels highlighted print mode.

Select inverted print mode

<SI> (0F)H

Data following this code is printed out in inverted characters. This code is valid only when input at the beginning of a line, thus, normal and inverted characters cannot be mixed in on the same line.

FUNCTION

CODE

OUTLINE

Cancel inverted print mode

<DC2> (12)H

Cancels the inverted character mode. This code is valid only when input at the beginning of a line.

7-2. Control Codes Used for Line Spacing

FUNCTION

CODE

OUTLINE

Line feed

<LF> (0A)H

Data in the line buffer is printed out and one line is fed. If data does not exist before this code is received, the printer only feeds one line.

FUNCTION

CODE

OUTLINE

FUNCTION

CODE

OUTLINE

Line feed (Same as LF)

<CR> (0D)H

Functions the same as an LF code.

When DIP SW 1-3 is set to ON, this code becomes invalid.

Set 1/6-inch line feed

<ESC> “z” “1” or <ESC> “z” <1>

(1B)H (7A)H (31)H or (1B)H (7A)H (01)H

Line feed is set at 1/6-inch after this code is received.

– 36 –