Star Micronics SP300 Series manual Function

FUNCTION

CODE

OUTLINE

FUNCTION

CODE

OUTLINE

Set deselect mode

<DC3> (13)H

(1)When using serial interface printer:

This function differs depending on the setting of DIP switch 4.

a)When the DC1, DC3 invalid mode is set (DIP switches 4-1 to 4-4 are all set to ON), the printer ignores this code.

b)In the DC1, DC3 valid mode (with DIP switches 4-1 to 4-4 set to OFF), data following this code is ignored when the printer receives a <DC3> code.

The deselect mode is canceled by <DC1> code.

c)If the printer receives a <DC3> code during an addressable mode (with DIP switches 4-1 to 4-4 set to settings other than a) and b) above,), the data follow- ing this code is ignored.

Deselect mode can be canceled by a <DC1> n code. Note that addressable mode is valid only when the RS- 422A interface option is installed.

(2)When using parallel interface printer;

Data following this code is ignored when the printer receives a <DC3> code.

The deselect mode is canceled by <DC1> code.

Set select mode

When using serial interface printer; <DC1> or <DC1>n

(11)H or (11)H n

When using parallel interface printer <DC1>

(11)H

(1)When using serial interface printer;

This function differs depending on the setting of DIP switch 4.

a)When the DC1, DC3 invalid mode is set (DIP switches 4-1 to 4-4 are all set to ON), the printer ignores this code.

b)In the DC1, DC3 valid mode (with DIP switches 4-1 to 4-4 set to OFF), when the printer receives a <DC1> code, the deselect mode is canceled and data follow- ing this code is input to the buffer.

– 51 –