– 65 –
APPENDIX
A-2. Paper Specifications
Recommended paper-roll types:
Nippon Paper Industries TF50KS-E (normal type paper)
TF62KS-E (normal type paper)
Oji paper Co.,Ltd. KF-730 (normal type paper)
Mitsubishi Paper Mills Limited P220AG (normal type paper)
AF P235 (*1 high image stability paper)
Ricoh Co., Ltd. 130 LSB (*1 medium image stability paper)
*1 When using the AFP235 and 130LSB paper rolls, set the Print density on
maximum in the Print Density Adjustment as described in Section 6-3.
Many paper types are available. Please use paper that meets the following
criteria.
1. Paper type General high-sensitivity thermal paper
General high-sensitivity label paper
2. Paper width 60 mm ~ 82-1 mm
•When using narrow paper, be sure that the
paper is at least wide enough to keep the platen
and head from touching. Never use paper that
allows the head to touch the platen.
•If the paper width is 70 mm or less, do not run
the platen in reverse.
3. Paper thickness General thermal paper: 60 ~ 150 µm
Label paper: Max. 160 µm
4. Paper rolls Internal diameter: 25.4 mm (1 inch)
Outer diameter: 115 mm
Rolls must have the thermal side facing in-
wards. Never use tape or other adhesive to
fasten the trailing end of the paper to the roller.