– 5 –
ENGLISH
4. Connecting the interface cable

4-1. Serial interface

Follow the procedures below to connect the interface cable:
Fig. 4-1
1Switch off the power to the printer
and computer.
2Insert the interface cable in the con-
nector. (Be sure that the cable is
oriented correctly before inserting
it.)
3Fasten the right and left screws to
fix them in place on the connector.
4Connect the other end of the inter-
face cable to your computer.
NOTE: The data transfer conditions between the computer and the printer must
be made compatible with the DIP switch settings on the printer. (Refer
to “APPENDIX”.)

4-2. Parallel interface

1Switch off the power to the printer
and computer.
2Insert the interface cable in the con-
nector. (Be sure that the cable is
oriented correctly before inserting
it.)
3Fasten the connector clasps.
4Connect the other end of the inter-
face cable to your computer.
Fig. 4-2
Interface cable
Interface connector