Sterling SMS 850, 1200, 2000, 1500 Drive, Rotor, Cutters, Bed Cutters, Rotor, cutters, bed cutters

Drive

The drive of the rotor runs using an electric motor via V-belts. The motor (mounted on sliding rails or a motor plate) can be adjusted for regulating the tension of the V-belts using tensioning screws. The V-belt pulley is attached to the motor shaft with a special tensioning element.

Drive motor

NOTE: Please observe the operation manual from the manufacturer!

Rotor, Cutters, Bed Cutters

Rotor, cutters, bed cutters

•The material is shredded between the cutters assembled on the rotor and the bed cutters; they are mounted in a fixed position in the machine lower section.

•All rotors are equipped with square cutters. These cutters make light work of the heaviest pieces.

NOTE: The cutters have four corners so they can be easily turned once a corner has worn out.

•The design of the rotor has a significant influence on the quality of the shredding process and the results. The rotor construction, the type of cutter mounting and the number of cutters have been matched to the application.

EJ5-615 Chapter 2: Functional Description 14 of 85