WARNING! Danger of cutting caused by sharp cutters at all
Dismounting the Bed Cutters
1.Switch OFF the shredder at the main switch.
2.Safeguard main switch using a padlock.
3.Open the upper hopper door.
4.Safeguard the hopper door.
NOTE: Although it is possible to reach the cutters by climbing into the feeding chamber, it is recommended to access the cutters through the front side door.
5.Clean the hexagon head socket of the cutter mounting screws (2) and the cover plates mounting screws.
6.Loosen the cover plate mounting screws using a high quality Allen key (10 mm). Knock the Allen key lightly with a hammer to loosen if necessary.
7.Take out the screws and cover plates.
8.Loosen the cutter adjusting screws for pulling and take them out.
9.Loosen the cutter mounting screws with Allen key (10 mm). Use a hammer to lightly knock key if necessary.
10.Take out the cutter mounting screw and cutter.
Chapter 5: Maintenance | 45 of 85 |
