Sterling 2000, 1200, SMS 850, 1500 manual Emptying the Screen standard screen

•Throw the grinding material into the in-feed hopper.

•The machine should be fed from the front.

•If your machine has an additional in-feed device installed, please observe the additional information for working with the in-feed device.

DANGER! Do not climb into the in-feed hopper while operating the machine. Death will result.

Emptying the Screen (standard screen)

1.Switch OFF the shredder at the main switch

2.Safeguard main switch using a padlock.

3.Open the machine door.

4.Safeguard the machine door.

5.Hold the screen with a forklift.

3

2

1

4

(1)Screen

(2)Screen mounting screws

(3)Cutter adjusting screws

(4)Forklift

6.Remove the screen.

7.Empty the screen.

8.Put the screen back using a forklift.

9.Fasten the mounting screws.

10.Close the machine door.

11.Shredder can be started again.

BJ5-615 Chapter 4: Operation 29 of 85